SNA level sensor: replaced by SNP probe

Submersible probes, Adjustable level probe, Sensors

***** This product is replaced by the SNP probe*****

The high precision SNA immersed level sensor is dedicated to low level and pressure measurement (max 1 bar value ex works). It is perfectly adapted to water level measurements in natural environments (rivers, canals, etc...) or of loaded effluents (pumping stations, storm overflows, ...).

The probe can be parameterised by the user simply by using the box ADP USBbox, the CAB USBB and the free HMI sensor software, or set up at the factory, according to your needs (see SN SETTINGS). The sensor delivers a 4/20 mA or 20/4 mA signal according to the parameterization, on 2 wires without capillary (CABSNX). The measuring or full scale ranges are from 0.5 m to 10 m, powered from 8 to 35 Vdc. Its body is made of 316L passivated stainless steel.

Read the full description

Out of stock

Manufacture PARATRONIC workshop, France

Description
Downloadable documents

***** This product is replaced by the SNP probe*****

The SNA level sensor is a programmable sensor designed to measure a relatively low water level or pressure: up to 1 bar. It ensures a very high accuracy of measurement, including in the case of temperature variation (measurement in natural environment, low water level, low water level measurement, etc.). However, during its use, the SNA sensor must not be subjected to sudden variations in pressure or to exceeding its characteristic values.

The ANS is a measuring instrument and should therefore be handled with care and not be subjected to severe mechanical or thermal shock or vibration.

User-configurable via the box ADP USBbox, the CAB USBB and free sensor HMI software.