AQUA-CJ V1.2.13 update April 4, 2025

Version 1.2.13 generated on April 4, 2025 is now available.

Link to AQUA-CJ product page

AQUA-CJ update

Changes between version 1.1.18 and version 1.2.13 :

IRIDIUM support (with RS232/RS485 card)

Several improvements to export and modem management, particularly in the event of errors

Immediate 2G/3G/4G mode changeover (no need to deactivate and then activate the modem)

Clarification of IP wake-up time

• IP wake-up starts and maintains the connection for the time set in IP wake-up or until a connection is established.
• The connection is maintained for the time defined as "HMI activation time", restarted with each interaction (click).
• If disconnected, wait 2 minutes before switching off
• A transfer in progress prevents the connection from being disconnected (useful for updates, for example).

NTP: Increase interface activation time (+2 min) if last NTP sync > 24h

Automation :

• Authorization of floating-point numbers for the "conversion table".
• The logical counter is now persistent on a station reboot.
• Add automation blocks (Multiplication, Division, Power, Polynomial, Bit Read/Write)

Periods :

• Periodic event: Correction to the selection of days of the week
• Add date event. This is a periodic event over the year, allowing you to know whether it's summer or winter, for example.

Integrated HMI :

• Improved ONVIF video stream visualization
• New, more accessible layout for "Extensions" pages (+ updated images)

Web GUI :

Web page compression.

Transferred data are compressed, with 2 main advantages:

• For small packages, much less data will be used when connecting to the web HMI.
• For slow connections, this will have a big impact on page load times (for fast or normal connections, the impact will be negligible).

Other

• Screen calibration button added from ihm web
• Add the following information to the header of each page: Station name, Version and Hydro3 code.
• Various corrections to errors and wording
• In exports, non-activated media are grayed out.
• On the tools/modem page: add network type (2G, 3G, 4G...)
• Trigger maintenance appointment display
• Serial spy: Corrected interface selection when the same interface is present more than once.

Automation graph

• Add a legend
• Improved connection lines with better highlight management
• Various corrections, including several cases where the graph was not displayed

Modbus :

• TCP: can be Master and Slave simultaneously
• Read/write of same variable possible
• Port 80 forbidden for slave mode

Numerous miscellaneous corrections

Update process

Use the "swu" file as supplied:

• Or via the Web HMI in the "Maintenance" page, "Firmware" accordion.
• Either by putting the file on a USB stick and going to the "Maintenance" page, the Web HMI or the integrated HMI.